Abb.3 :
Spannungszustand am Rohr links vor und rechts nach 10 Verschiebungszyklen
Abb.3:
www.igth.uni-hannover.deFig.3 :
Contact pressure on the pipe, left after placement of the sand fill, right after 10 cyclic displacements
Fig.3:
www.igth.uni-hannover.deInnensechskantschlüssel 3 mm ( Befestigungsschrauben ) und 2 mm ( Vibrationssicherung ) − Drehen Sie die Vibrationssicherung zurück, sodass diese nicht über die Anfräsung des Rohrdurchmessers herausragt ( siehe Bild rechts ).
− Befestigen Sie den Spannblock mittels der mitgelieferten Schrauben in der gewünschten Position am Rohr .
Das maximal zulässige Anzugsmoment beträgt 2 Nm bei Rohrdurchmessern bis 17,2 mm und 4 Nm für größere Rohre.
www.labom.comHexagon socket wrench 3 mm ( mounting screws ) and 2 mm ( vibration protection ) − Turn back the vibration protection, so that it does not exceed the semi-cycle groove for the pipe ( see picture to the right ).
− Mount the clamping block with the included screws at the intended position on the pipe.
Do not exceed the allowed tightening torque of 2 Nm for pipe diameters up to 17,2 mm and 4 Nm for bigger pipes.
www.labom.comEinfarbdesigns
Wählen Sie Ihre Farbe und sehen Sie die Farbe am Rahmen-Rohr und Farbbeispiele .
www.proactiv-gmbh.deOne-colour designs
Choose your colour and see the frame-tube colour and colour samples.
www.proactiv-gmbh.deMöchtest du ein Wort, eine Phrase oder eine Übersetzung hinzufügen?
Sende uns gern einen neuen Eintrag.