Lösung : torbo-Strahlen mit einem Druck von 5 bar und einem Strahlmittel von 0,0 bis 1,0 mm.
Nach dem Abtrag dieser Schichten wird zunächst Epoxydharz und Spachtel bis zu 6 mal aufgetragen.
Die Gelcoatschicht sollte eine Stärke von 1 bis 2 mm haben.
hotho.deSolution : torbo-blasting with a pressure of 5 bars and a blasting agent of 0.0 to 1.0 mm.
After removal of these layers, firstly, the epoxide resin and spreader are applied up to 6 times.
The gel coat layer must have strength of 1 to 2 mm.
hotho.deKubatura
Volumenbestimmung mit Auf- und Abtrag Software zur Massenermittlung zwischen Horizonten nach REB / GAEB mit 3D-Darstellung.
www.androtec.deKubatura
Cubature calculating with cut and fill Windows software for calculating cubatures of two surfaces with cut and fill according to REB / GAEB.
www.androtec.deLösung : torbo-Strahlen mit einem Druck von 3 bar und einem Strahlmittel von 0,0 bis 0,5 mm.
Nach dem Abtrag dieser Farbschichten wird der Osmosebefall in Form kleiner oder großer Blasen sichtbar.
hotho.deSolution : torbo-blasting with a pressure of 3 bars and a blasting agent of 0.0 to 0.5 mm.
After removal of these paint layers, the osmosis affliction is seen in the form of small or big bubbles.
hotho.deMöchtest du ein Wort, eine Phrase oder eine Übersetzung hinzufügen?
Sende uns gern einen neuen Eintrag.