Die Herausforderung bei Leiterplatten besteht insbesondere in den geringen Dimensionen der Öffnungen und Abstände im Lötstopplack neben einer hohen Dichte von Kontaktpads, die es zu entflechten gilt.
GS Swiss PCB AG kann Lötstopplackstrukturen mit geringen Abmessungen herstellen, indem der Lötstopplack entweder mit Laser belichtet wird oder der ausgehärtete Lötstopplack per Laser abgetragen wird.
Für hohe Anschlussdichten stehen kupfergefüllte Microvias in den Pads ( Via in Pad ) zur Verfügung.
www.swisspcb.chOn the PCB side the challenges are very small dimensions and high pitch of the openings in the solder mask as well as a high density of contact pads that need to be routed.
GS Swiss PCB AG has the capability to manufacture solder mask with very fine structures by either exposing the solder mask with laser or by ablating cured solder mask with a laser beam.
For designs with a high pitch, copper filled micro vias in the pads ( via in pad ) can be used.
www.swisspcb.chDieses Material eignet sich besonders für den Einsatz on Bauteilen, die eine hohe Wärmeableitung benötigen ( z.B. Leistungsrelais und Leistungs-LEDs ).
Wir fertigen zurzeit nur einseitige, nicht durchkontaktierte Leiterplatten ( inklusive Lötstopplack auf der Bauteilseite ) aus diesem Material.
Als Lötoberfläche bieten wir bevorzugt ChSn oder ChNiAu an.
www.brockstedt.deThis material is particularly suitable for components which require a high heat conduction ( e.g. power relays and power LEDs ).
Currently, we only produce one-sided, not plated through boards ( including solder resits on the component side ) made of this material.
As a solder surface, we preferably offer ChSn or ChNiAu.
www.brockstedt.deMit LPKF ProMask werden professionelle Lötstoppmasken schnell und effektiv auf strukturierte Leiterplatten aufgebracht.
Die Leiterplatten-Prototypen erhalten das perfekte Oberflächen-Finish für ein Löten ohne Kurzschlüsse.Der Lötstopplack eignet sich für das Löten von SMD- und herkömmlichen Bauelementen.
sameDomain
www.lpkf.deWith LPKF ProMask a professional solder resist mask will be applied to the already milled prototype circuit board.
LPKF ProMask gives prototype PCB’s the professional finish they deserve and enables the soldering of SMD or conventional components with no fear of short circuits.
sameDomain
www.lpkf.deMöchtest du ein Wort, eine Phrase oder eine Übersetzung hinzufügen?
Sende uns gern einen neuen Eintrag.