Bei traditionellen Druckwindkesseln liegt das Gaspolster unmittelbar über dem Fördermedium.
Bei Druckspitzen und/oder erhöhtem Fördervolumen wird dieses Polster über der Flüssigkeit komprimiert und beim Saughub der Pumpe wieder entspannt.
Die Flüssigkeit wird nun wieder in die Förderleitung abgegeben und minimiert so die Pulsationen.
www.feluwa.deWith traditional pressure air vessels, the gas cushion is held directly above the conveyed fluid.
Under peak pressures and/ or excessive flow, this cushion is compressed above the fluid level and released during the suction stroke of the pump.
The fluid is then displaced into the discharge pipe and minimises pulsations accordingly.
www.feluwa.deBei Fördermedien, die keinen Kontakt zum Luftpolster im Windkessel zulassen oder bei Anwendungen mit hohem Betriebsdruck verwendet FELUWA bewährte Schlauchmembran-Pulsationsd... mit angebautem FELUWA Rollmembranspeicher oder angebautem Blasenspeicher, die auf ca. 80 % des Betriebsdruckes vorkomprimiert werden.
Mit jedem Druckhub komprimiert die Luft im Speicher und gibt das damit aufgenommene Volumen beim Saughub wieder ab.
www.feluwa.deFor conveyed fluids which do not allow for a contact with the air cushion in the pulsation dampener and for high pressure applications, FELUWA applies state-of-the-art hose-diaphragm pulsation dampeners with roller diaphragm accumulators or bladder-type accumulators, which are pre-charged to approx. 80 % of the operating pressure.
The discharge flow on each pump stroke that exceeds the average flow is stored by compression of the air volume within the accumulator.
www.feluwa.deMöchtest du ein Wort, eine Phrase oder eine Übersetzung hinzufügen?
Sende uns gern einen neuen Eintrag.