Modellierung der Depositionsbildung und Feinstaubbildung in Biomasse-befeuerten Kesseln
Berechnung des Wärmeübergangs und des Einflusses von Depositionen (Slagging und Fouling) in Biomasse-befeuerten Kesseln
Verweilzeitberechnungen mit verschiedenen Methoden (Lagrange oder Euler) als Basis für das optimierte Design von Primärverbrennungszonen (NOx-Reduktion durch Primärmaßnahmen) und Sekundärverbrennungszonen (Rauchgasausbrand), SNCR- und Additivinjektionssystemen
www.bios-bioenergy.atModelling of the formation of ash deposits and fine particulates in biomass fired boilers
Calculation of heat transfer in and the influence of deposits (slagging and fouling) on biomass fired boilers
Calculation of particle residence times using different methods (Lagrange and Euler) for the optimised design of primary combustion zones (NOx reduction via primary measures) and secondary combustion zones (flue gas burnout), SNCR and additive injection systems
www.bios-bioenergy.atPräsenz-Seminar :
Berechnung des Wärmeübergangs zwischen Fluid und Struktur mit ANSYS Workbench Dauer:
2 Tag ( e )
www.cadfem.chClassroom-Seminar :
Introduction to simulation of joint- and muscle-forces with AnyBody Duration:
3 Day ( s )
www.cadfem.chBei der Anwendung übernimmt dieses Produkt folgende Aufgaben :
- Schmierung zwischen Strang und Kokille - Kontrolle des Wärmeübergangs zwischen Strang und Kokille - Thermische Isolation der flüssigen Stahloberfläche - Verhinderung von Reoxidation - Aufnahme von Einschlüssen
Die obigen Aufgaben werden durch folgende Parameter kontrolliert:
www.metallurgica.deScorialit SPH is a hollow-sphere product, with the same functions as fine powders :
- Lubrication between the solidifying strand and mould wall - Control of heat transfer between the strand and mould - Thermal insulation of the liquid steel surface - Prevention of re-oxidation - Inclusion absorption
The above functions are controlled by the following pproperties:
www.metallurgica.deMöchtest du ein Wort, eine Phrase oder eine Übersetzung hinzufügen?
Sende uns gern einen neuen Eintrag.