Eine passende Wandhalterung muss somit dann auch dem VESA100-Standard entsprechen, sonst kann diese nicht an dem Gerät montiert werden.
Bild zeigt wie der Lochabstand gemessen wird
Folgende VESA FDMI Standards gibt es:
www.prad.det be able to be mounted on the device.
The hole center distance is being measured as shown in the picture
There are the following VESA FDMI standards:
www.prad.deVESA MIS-D 75 und 100, werden auch als VESA75 bzw. VESA100 bezeichnet.
Die Zahl 100 in der Bezeichnung gibt dabei den Lochabstand der Verschraubung an.
VEAS100 bedeutet also, das der Lochabstand auf Seiten des TFT Displays oder des TFT-TV Gerätes 100 x 100 mm beträgt.
www.prad.deVESA MIS-D 75 and 100 are also called VESA75 and VESA100.
And the number 100 in the term is indicating the distance between the screws in this regard.
VESA100 means the distance between screws measures 100 x 100 mm on the side of the LCD display or the LCD TV.
www.prad.deZur Befestigung an Lochplatten mit
Lochabstand 30 mm (entspricht der Euro-
Schlüssellochung), Steckteile verzinkt mit
www.oek-display-systeme.deTo attach frames to pegboards with hole
centres at 30 mm (corresponds to Euro
keyhole standard), plug components
www.oek-display-systeme.deMöchtest du ein Wort, eine Phrase oder eine Übersetzung hinzufügen?
Sende uns gern einen neuen Eintrag.